Locomotive Body kits & NEW Kit Release

Online Catalogue | N Scale (1/148th) Kits |  Locomotive Body kits & NEW Kit Release

G.W.R. 56XX  0-6-2T Loco Body Kit  (N Scale 1/148th)

G.W.R. 56XX 0-6-2T Loco Body Kit (N Scale 1/148th)

Ref: B1


Price: 29.00 / Euro34.80 (Including UK/EU VAT at 20%)

Quantity:

(Requires Farish/Bachmann 94XX chassis to complete)
150 of these engines were built at Swindon plus a further 50
at Armstrong Whitworth. Primarily used for coal traffic these
locos also appeared on local passenger trains. Designed by
C B Collett and introduced in 1924
Unpainted kit


GWR 0-6-0 2251 CLASS LOCO BODY/TENDER KIT  (N Scale 1/148th)

GWR 0-6-0 2251 CLASS LOCO BODY/TENDER KIT (N Scale 1/148th)

Ref: B2


Price: 33.60 / Euro40.32 (Including UK/EU VAT at 20%)

Quantity:

Requires farish/Bachmann 94xx & Tender underframe
(tender underframe B3b GWR etched brass tender underframe or Graham Farish GWR tender underframe see Tender section)
The class was introduced by C B Collett over a period of
years from 1930. They were designed for mixed traffic work.
Nb: this kit includes alternative cab sides to enable the war-
time version to be portrayed, some ran with a different ten-
der, for details see our Loco Accessory list.
Unpainted kit


G.W.R. Diesel Parcels Railcar Body Kit  (N Scale 1/148th)

G.W.R. Diesel Parcels Railcar Body Kit (N Scale 1/148th)

Ref: B4a


Price: 29.00 / Euro34.80 (Including UK/EU VAT at 20%)

Quantity:

Requires Grafar (Farish) Diesel Railcar 8179-----Not Stocked (buy 2nd hand).
This vehicle was used primarily on Express Parcels between Paddington and Reading General.
Re tooled with incresed detail of the Diesel Railcar onto GF railcar chassis
Unpainted kit

GWR Twin Railcar  (N Scale 1/148th)

GWR Twin Railcar (N Scale 1/148th)

Ref: B5


Price: 46.00 / Euro55.20 (Including UK/EU VAT at 20%)

Quantity:

Chassis required Farish original Railcar chassis
(wheels and bogies included for other car.)
Unpainted kit

GWR STEAM RAILMOTOR BODY KIT  (N Scale 1/148th)

GWR STEAM RAILMOTOR BODY KIT (N Scale 1/148th)

Ref: B8


Price: 44.50 / Euro53.40 (Including UK/EU VAT at 20%)

Quantity:

Requires Original Lifelike C420 chassis (buy 2nd hand)
The model represents Steam railmotorNo's 17,18 & 25
Withdrawn 1919-20 and converted to non-powered Auto
Trailers.
(You can use Bachmanns GP50 (stocked) twin ended drive and disconnect one drive to extend the body, not an expensive chassis but you will need care to disconnect drive (NB this will invalidate any warranty Bachmann supply with the unit)
Unpainted kit

G.W.R.  14XX  & 70' PANELLED AUTO COACH BODY KIT  (N Scale 1/148th)

G.W.R. 14XX & 70' PANELLED AUTO COACH BODY KIT (N Scale 1/148th)

Ref: B9


Price: 69.90 / Euro83.88 (Including UK/EU VAT at 20%)

Quantity:

Required Farish DMU motor bogie 8109 - not stocked (buy 2nd hand)
This kit comes complete with wheels for the loco, just need a spare coach bogie to complete for the coach. These vehicles regularly ran with the 14XX 0-4-2T loco's or Auto fitted
Pannier's
(You can use Bachmanns GP50 (stocked) twin ended drive and disconnect one drive to extend the body, not an expensive chassis but you will need care to disconnect drive (NB this will invalidate any warranty Bachmann supply with the unit)
Unpainted kit

LNER 2-6-4T CLASS L3(L1) BODY KIT  (N Scale 1/148th)

LNER 2-6-4T CLASS L3(L1) BODY KIT (N Scale 1/148th)

Ref: B10


Price: 33.80 / Euro40.56 (Including UK/EU VAT at 20%)

Quantity:

Requires Farish Prairie 61xx chassis, the later model
with 6mm pony wheels to complete)
3x axles of pony wheels are included in the kit as replace-
ments. Designed by J C Robinson for the Great Central Rail-
way and used on heavy coal trains, classed by the LNER as
LI they were re classified to L3 after the introduction of
Thompson's 2-6-4T class LI
Unpainted kit


LNER Sentinel Steam Railcar Body Kit only (N Scale 1/148th)

LNER Sentinel Steam Railcar Body Kit only (N Scale 1/148th)

Ref: B11


Price: 37.50 / Euro45.00 (Including UK/EU VAT at 20%)

Quantity:

Requires Chassis Either Farish DMU Motor Bogie 8109 (4 wheel power bogie) OR Likelike C420 (single ended drive) -----Not Stocked (buy 2nd hand) Chassis difficult to get now, you can use Bachmann GP50 chassis but take care the wheelbase needs extending so one drive end needs disconnecting (you can extend and reconnect or leave as single end drive)
The majority of these (named after famous stage coaches) ran in the North Eastern section of the LNER up to 1942/3
Unpainted kit
One of our customers has sucessfully fitted a 'tomytec TM06' chassis to this kit. Which is a straightforward fit to the body. The chassis is powered on all 4 axels

LNER B1 4-6-0 TENDER LOCO BODY KIT  (N Scale 1/148th)

LNER B1 4-6-0 TENDER LOCO BODY KIT (N Scale 1/148th)

Ref: B12


Price: 33.80 / Euro40.56 (Including UK/EU VAT at 20%)

Quantity:

Requires Farish Black 5 & tender chassis-----
Designed by E Thompson as part of his standardisation pro-
posals for the LNER, they were to be found in all areas of the
LNER on mixed traffic duties. A number were named.
Unpainted kit

LNER N2 CLASS 0-6-2T LOCO BODY KIT  (N Scale 1/148th)

LNER N2 CLASS 0-6-2T LOCO BODY KIT (N Scale 1/148th)

Ref: B13


Price: 29.00 / Euro34.80 (Including UK/EU VAT at 20%)

Quantity:

Requires Farish Prairie 61xx chassis -----
These locos were designed by Sir N Gresley for
outer suburban duties from Kings Cross, condensing pipe-
work is included to portray those so fitted for working the
Metropolitan lines, some were transferred to the Eastern sec-
tion and some to Scotland.
Unpainted kit

STREAMLINED LMS 4-6-2 CORONATION KIT  (N Scale 1/148th)

STREAMLINED LMS 4-6-2 CORONATION KIT (N Scale 1/148th)

Ref: B14


Price: 36.70 / Euro44.04 (Including UK/EU VAT at 20%)

Quantity:

(Requires Minitrix Brittania Loco and Tender chassis to complete)
You can use Farish Duchess but the kit will require adaption
Unpainted kit

LMS (Ex L&Y) STEAM RAILMOTOR BODY KIT  (N Scale 1/148th)

LMS (Ex L&Y) STEAM RAILMOTOR BODY KIT (N Scale 1/148th)

Ref: B15


Price: 36.70 / Euro44.04 (Including UK/EU VAT at 20%)

Quantity:

Requires original Lifelike GP40 or C420 single ended drive chassis -----Not Stocked (buy 2nd hand)
(You can use Bachmanns GP50 (stocked) twin ended drive and disconnect one drive to extend the body, not an expensive chassis but you will need care to disconnect drive (NB this will invalidate any warranty Bachmann supply with the unit)
These unusual railcars featured a removable locomotive sec-
tion to facilitate repair, they were intended for use on short
branch lines on the L&Y system
Unpainted kit

LMS PRINCE of WALES 4-6-2T LOCO BODY KIT  (N Scale 1/148th)

LMS PRINCE of WALES 4-6-2T LOCO BODY KIT (N Scale 1/148th)

Ref: B16


Price: 35.00 / Euro42.00 (Including UK/EU VAT at 20%)

Quantity:

(Requires an early Grafar 61 XX prarie tank
Requires 1 x tiny 4.5mm pony wheels to complete + chassis nb; (1 set of the pony wheels are supplied on the chassis you will need to acquire an additional axle of the 4.5mm wheels.
These locos were built between 1910-16 for the LNWR by C Bowen-Cooke
For Express passenger service. They were taken into LMS
service at the grouping 1923.
Unpainted kit


SOUTHERN URIE S15 4-6-0 TENDER LOCO KIT  (N Scale 1/148th)

SOUTHERN URIE S15 4-6-0 TENDER LOCO KIT (N Scale 1/148th)

Ref: B17


Price: 33.80 / Euro40.56 (Including UK/EU VAT at 20%)

Quantity:

(Requires Fleischmann 7160 or 7161 to complete)-----Not Stocked (buy 2nd hand)
These locos designed by R W Urie for the LSWR in 1920
were primarily a Freight version of the King Arthur Class, although they were subsequently used on relief Expresses and Boat Trains with great success. This Western section model features the Bogie watercart tender.
Unpainted kit

SOUTHERN E2 CLASS 0-6-O BODY KIT  (N Scale 1/148th)

SOUTHERN E2 CLASS 0-6-O BODY KIT (N Scale 1/148th)

Ref: B18


Price: 27.00 / Euro32.40 (Including UK/EU VAT at 20%)

Quantity:

Requires farish pannier 94xx chassis
Designed by R Billington for the LB&SCR primarily for
shunting and dockside work. The last locos were withdrawn
1961-3
Unpainted kit

SOUTHERN Q1 CLASS 0-6-0 TENDER LOCO BODY  (N Scale 1/148th)

SOUTHERN Q1 CLASS 0-6-0 TENDER LOCO BODY (N Scale 1/148th)

Ref: B19


Price: 33.80 / Euro40.56 (Including UK/EU VAT at 20%)

Quantity:

Requires farish 94xx ----- (tender underframe GWR B3b) or Farish GWR Tender Under frame
This austerity wartime loco was built by 0 V S Bul-
leid for Heavy Freight and occasional Passenger work. They were designed as a short term wartime loco yet were
so successful that they lasted to the end of steam, rarely seen in the west country. Brass overlays are also included to portray the distinctive BFB wheels.
Unpainted kit

SOUTHERN E5 CLASS 0-6-2T LOCO BODY KIT  (N Scale 1/148th)

SOUTHERN E5 CLASS 0-6-2T LOCO BODY KIT (N Scale 1/148th)

Ref: B21


Price: 29.00 / Euro34.80 (Including UK/EU VAT at 20%)

Quantity:

Requires farish pannier 94xx chassis
Designed by R Billington for the LB&SCR these usefull lo-
comotives built primarily for Passenger work were some-
times seen performing mixed traffic duties. The last was
withdrawn in 1956.
Unpainted kit

BR STANDARD CLASS 4MT 4-6-0  & BR2 Tender   (N Scale 1/148th)

BR STANDARD CLASS 4MT 4-6-0 & BR2 Tender (N Scale 1/148th)

Ref: B23


Price: 33.60 / Euro40.32 (Including UK/EU VAT at 20%)

Quantity:

Requires chassis- Farish Class 5 & tender chassis
These class 4 Mixed Traffic Locos designed by R Riddles as
part of the range ofBR Standard Locos were widely used
throughout BR and appeared in both Black mixed traffic
livbery and Green Passenger livery. The kit includes 2 x
chimneys to enable the modeller to portray either single or
double chimney version . A BR2 tender is included in the kit.
Those locos allocated to the Southern Region were generally
fitted with the largercapacity BRIb tender. This is available
as an extra for details see or Loco Accessory list.
Unpainted kit

BR CLASS 24 DIESEL Bo-Bo  (N Scale 1/148th)

BR CLASS 24 DIESEL Bo-Bo (N Scale 1/148th)

Ref: B24


Price: 29.00 / Euro34.80 (Including UK/EU VAT at 20%)

Quantity:

Requires Farish Class 25 chassis 8309 Not stocked (buy 2nd hand)
The Sultzer type 2 (later class 24) was one of the pilot
scheme diesels introduced by BR. In the early days they ran
on the Southern to cover for late delivery of the class 33 and
were seen on all types of duties including double heading
steam locos. Subsequently transferred to the Eastern & Mid-
land regions they performed many years of service.
Unpainted kit

BR CLASS 21(29) Bo-Bo DIESEL BODY KIT.  (N Scale 1/148th)

BR CLASS 21(29) Bo-Bo DIESEL BODY KIT. (N Scale 1/148th)

Ref: B25


Price: 29.00 / Euro34.80 (Including UK/EU VAT at 20%)

Quantity:

Requires Farish Class 25 chassis 8309 Not stocked (buy 2nd hand)
These locos another of the pilot scheme diesels introduced as class 21 were very troublesome and subsequently a number were re-engined classified class 29 and spent the rest of their days in Scotland well away from London where they started!
Unpainted kit

BR/SR Class 4  4-6-0 & BR1b tender  (N Scale 1/148th)

BR/SR Class 4 4-6-0 & BR1b tender (N Scale 1/148th)

Ref: B26


Price: 33.80 / Euro40.56 (Including UK/EU VAT at 20%)

Quantity:

Requires chassis - Farish Class 5
Unpainted kit

BR Class 4MT  2-6-0 & BR1b tender  (N Scale 1/148th)

BR Class 4MT 2-6-0 & BR1b tender (N Scale 1/148th)

Ref: b27


Price: 33.80 / Euro40.56 (Including UK/EU VAT at 20%)

Quantity:

Requires chassis - farish Crab & tender
These 4MTs were lighter than the 4-6-0 version and ap-
peared widely on the Southern region, venturing onto the
S&DJR regularly in addition to use elsewhere. The kit is sup-
plied with the BR1b tender, those wishing to model the Southern locos can obtain the BR2 tender as an extra, for details see our Loco Accessory List
Unpainted kit

LMS/BR  7P Pacific Express  (N Scale 1/148th)

LMS/BR 7P Pacific Express (N Scale 1/148th)

Ref: B33


Price: 40.80 / Euro48.96 (Including UK/EU VAT at 20%)

Quantity:

Requires Minitrix Britannia
Can fit Farish Dutchess with adaption.
Unpainted kit

BR STANDARD CLASS 5MT 4-6-0 & BR1 tender  (N Scale 1/148th)

BR STANDARD CLASS 5MT 4-6-0 & BR1 tender (N Scale 1/148th)

Ref: B36


Price: 36.80 / Euro44.16 (Including UK/EU VAT at 20%)

Quantity:

Requires farish A3 & Farish LMS tender underframe
B1a LMS etched brass Tender underframe. as alturnative to the Farish Tender underframe.
This highly successful design based on the LMS
Black V by R Riddles saw widespread use on BR including
the S&DJR where they were highly acclaimed by the
crews.The kit is supplied with the BR1 tender. Those wishing
to model the Southern allocated locos may if they wish, use
the higher capacity BRIb tender available as an extra, for de-
tails see our Loco Accessory List
Unpainted kit

GWR HAWKSWORTH 4-6-0 COUNTY CLASS LOCO BODY/TENDER KIT  (N Scale 1/148th)

GWR HAWKSWORTH 4-6-0 COUNTY CLASS LOCO BODY/TENDER KIT (N Scale 1/148th)

Ref: B37


Price: 50.50 / Euro60.60 (Including UK/EU VAT at 20%)

Quantity:

(Requires Farish/Bachmann Hall class chassis to complete)
Nb: this kit contains a complete etched brass tender under-
frame of the correct pattern (the Hall type is incorrect) This
class was the last of a long line of GWR 4-6-0's These strong
locos spent most of their lives in Devon and Cornwall
3 Alturnative chimneys supplied.
Unpainted kit

LNER B2 CLASS 4-6-0 TENDER LOCO BODY KIT  (N Scale 1/148th)

LNER B2 CLASS 4-6-0 TENDER LOCO BODY KIT (N Scale 1/148th)

Ref: B38


Price: 50.50 / Euro60.60 (Including UK/EU VAT at 20%)

Quantity:

Rebuilt from the B17 Footballer.
(Requires Farish/Bachmann A3 loco chassis to complete)
Nb: a complete etched brass tender underframe is included in
this kit.
These locos were a Thompson re-build of Gresley's
famous B17's (the Footballers) and featured Thompsons Al
boiler as fitted to his Bl class, with 1 exception they were fit-
ted with tenders from the withdrawn C5 class and parts are
included in the kit to represent all variants of this tender, also
included is a Westinghouse pump for those members of the
class so fitted. The Odd man out was 61671 "Royal Sover-
eign" (the Royal Engine) and this was fitted with an LNER
group standard tender, if you wish to model this engine the
tender is available as an extra, for details see our Loco Ac-
cessory List.
Unpainted kit

Southern E2 Extended Tank  (N Scale 1/148th)

Southern E2 Extended Tank (N Scale 1/148th)

Ref: B39


Price: 37.80 / Euro45.36 (Including UK/EU VAT at 20%)

Quantity:

The Billington E2 Tanks were built in two batches of 5 locos the first Batch in 1913 (Langley Kit code B18) LBSC No’s 100-104. Southern No’s 2100-2104. A further 5 were ordered in 1914 (this Kit) LBSC Nos 105-109. Southern Nos 2105-09.
Chassis required Farish/Bachmann Pannier 94xx
Unpainted kit


GWR 97xx Loco  (N Scale 1/148th)

GWR 97xx Loco (N Scale 1/148th)

Ref: B40


Price: 37.80 / Euro45.36 (Including UK/EU VAT at 20%)

Quantity:

A class of 10 locomotives built 1933 based on the 57xx fitted with condensing gear for working on metropolitan lines to smithfield market in London All based at Old Oak Common.
Chassis required Farish/Bachmann 3f Jinty
Unpainted kit

LNER N7/3 Class 0-6-2 Loco  (N Scale 1/148th)

LNER N7/3 Class 0-6-2 Loco (N Scale 1/148th)

Ref: B41


Price: 38.60 / Euro46.32 (Including UK/EU VAT at 20%)

Quantity:

N7 class was designed by AJ Hill for the Great Eastern Railway in 1915. This model represents the later variant as used on Liverpool St Jazz trains to Chingford & Enfield Town in LNWR and BR (e) period. These powerful locomotives with this 4’10” wheels, superb powers of acceleration, excelled on the intensive stop/start Jazz service and lasted upto electrification of the GE outer surburban services in the 1960’s. The class appeared as far away as Cambridge and some GN areas
Chassis required Farish/Bachmann Pannier 94xx
Unpainted kit

G.W.R. Brown Boveri Gas Turbine Loco No 18000- reworked (N scale 1/148th)

G.W.R. Brown Boveri Gas Turbine Loco No 18000- reworked (N scale 1/148th)

Ref: B42


Price: 37.10 / Euro44.52 (Including UK/EU VAT at 20%)

Quantity:

Special limited release of the loco body kit.
Originally designed to fit the Lifelike SD45 which is only available 2nd hand.
A direct replacement for this chassis with improved running Bachmann GE Dash 40c (product code 85059 or 85053 & 50055)

Special Thanks to Mr Rutherford who supplied information on the use of the replacement chassis

Streamlined A4 Conversion Kit  (N Scale 1/148th)

Streamlined A4 Conversion Kit (N Scale 1/148th)

Ref: BC1


Price: 15.20 / Euro18.24 (Including UK/EU VAT at 20%)

Quantity:

Many parts to convert A4 into the streamlined version(s)
Requires Farish A4 loco (use any Bachmann Class 4 Locomotive )
Unpainted kit

Rhymney Conversion kit  (N Scale 1/148th)

Rhymney Conversion kit (N Scale 1/148th)

Ref: BC2


Price: 15.20 / Euro18.24 (Including UK/EU VAT at 20%)

Quantity:

Used to convert GP loco to other versions.
Requires Graham Farish General Purpose Tank Loco - not stocked
Unpainted kit

Online Catalogue | N Scale (1/148th) Kits |  Locomotive Body kits & NEW Kit Release